Accu-Chek Softclix Spécifications télécharger pdf (Page 28)

Chapter 1: Your New Meter

Notes:

• Do not operate without t

Maintenance and Trouble

• When applying blood, do

• Do not bend the test stri

• Never try to reuse a test

• Do not open the test dru

• After a blood sugar result

• If the display goes blank

the strip and turn off the

• Keep the test drum vial

to the numbers on the la

Proper Testing

• The temperature range m

outside this range, the me

Never artificially heat or co

• Humidity must be below 8

meter return to room temp

Chapter 3: Testing Your Blood Sugar

4. Immediately touch and hold the black notch on

the front edge of the test strip to the blood drop.

Do not pull away from the site until the meter

beeps or the 000 is displayed. You may apply

more blood for up to 25 seconds after applying

the first drop.

5. The 000 on the display gradually disappears and

the test result is displayed in 8 seconds. Test

results are automatically stored in the meter’s

memory.

6. Holding the meter upright, press to

release the test strip and turn the meter off.

7. To remove the lancet, take off the lancet device

cap and point the lancet end away from yourself.

8. Slide out the ejector to discharge the lancet into a

puncture-proof container.

For more information about your test results,

see

Understanding Your Test Results.

Chapter 3: Testing Your Blood Sugar ACCU-CHEK Customer Care Service Center 1-800-858-8072

361_26758_Manual_AC_Compact.qxp 6/27/05 11:35 AM Page 26

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

Pas de commentaire

Accu-Chek Softclix Spécifications Page 28