Accu-Chek INTEGRA Manuel d'instructions télécharger pdf (Page 7)

Accu-Chek Advantage

• Leave the meter switched off.

• Remove the code chip from the meter.

• Insert the Accu-Chek IR key into the meter in place of

the code chip.

• Place the meter approximately 10cm away from the

window of the Accu-Chek Smart Pix. Data transfers

automatically.

• Once data transfer is complete, the report will show

on screen.

Accu-Chek Spirit

• Place the Spirit approximately 10cm away from

the window of the Accu-Chek Smart Pix.

• Make sure that your Spirit pump is in STOP mode.

• Press the button to select the ‘Data

Communication’ function.

• Confirm your selection with the

button. Data

transfer starts automatically.

• When data transfer is completed, press the

button to quit this mode.

• Resume the insulin pump RUN mode to not

interrupt the supply of insulin.

Accu-Chek D-TRONplus

(and Disetronic D-Tronplus)

• Place the D-TRONplus (Disetronic D-TRON plus)

approximately 10cm away from the window of the

Accu-Chek Smart Pix. Both infra-red windows

must be facing one another.

• Make sure that the D-TRON pump is in STOP

mode and that the keylock is unlocked.

• Press the

button 4 times to select the ‘Data

Transfer’ function.

• Confirm your selection with the

button. Data

transfer starts automatically.

• When data transfer is completed press the

button to quit data transfer mode.

• Resume the insulin pump RUN mode to not

interrupt the supply of insulin.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Accu-Chek INTEGRA Manuel d'instructions Page 7