Accu-Chek Softclix Manuel d'utilisateur télécharger pdf (Page 14)

Initial steps before testing

2.4 Performing a full display check

To check that all of the elements are properly displayed, you should

carry out a full display test.

 Press and hold down the M button.

The meter turns on. As long as you hold down the M button, all the

display elements are visible. Compare the display screen of your meter

with the one shown below.

mmol/L meter mg/dL meter

All elements displayed

In Canada your meter should display mmol/L. If any of the display ele-

ments are missing or the unit shown for the blood glucose result is not

the correct one, please ask your healthcare professional or pharmacist.

You can also contact the Accu-Chek customer care line. Details are

given at the end of this User’s Manual.

 Release the M button.

The standard display test screen that is shown each time the meter

is turned on appears briefly. When it disappears, the meter is in

memory mode. As no results have yet been saved, three bars are

displayed.

 Press the Test button to turn the meter off.

The meter automatically turns off if you keep the M button

pressed for more than 60 seconds.

You can perform a full display test whenever you wish. If there

are already results saved in memory, the most recently saved

result is displayed when you release the button.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 81 82

Pas de commentaire

Accu-Chek Softclix Manuel d'utilisateur Page 14