Accu-Chek Softclix Informations techniques télécharger pdf (Page 28)

Chapter 2: Control Testing 26 ACCU-CHEK Customer Care Service Center 1-800-858-8072

Running a Control Test (continued)

4. The time and date appear on the display with a

flashing test strip and drop symbol.

5. Remove the control bottle cap.

6. Apply one drop of the control solution to a flat,

clean, and easily washable surface such as the

palm of your hand, a plate, or a table. Hold the

meter so the test strip points downward. Gently

touch and hold the black notch on the end of the

test strip to the control solution. Do not put

control solution on top of the test strip. When

you see displayed, you have enough control

solution in the test strip. Do not bend the test

strip while applying control solution. If you are

unsure if a surface is clean, you may use the same

cleaning solutions described in the

Cleaning Your

Meter

section on page 64.

7. Place the cap on the control bottle tightly.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 91 92

Pas de commentaire

Accu-Chek Softclix Informations techniques Page 28