Accu-Chek Softclix Informations techniques télécharger pdf (Page 68)

Chapter 5: Maintenance and Troubleshooting 66 ACCU-CHEK Customer Care Service Center 1-800-858-8072

Cleaning Your Lancet Device

To clean the ACCU-CHEK Softclix Plus lancet device, use a mild dishwashing liquid and a soft cloth. DO NOT

place the entire device under water. At least once a week, disinfect the cap after cleaning by placing it in

10% bleach solution*, 70% alcohol (ethyl alcohol) or 70% rubbing alcohol (isopropyl alcohol) for 10 minutes.

Allow the cap to air-dry after disinfecting.

Maintenance and Testing

Your meter needs little or no maintenance with normal use. It automatically tests its own systems every time

you turn it on and lets you know if something is wrong. See

Display Messages and Troubleshooting

for error

messages and what to do about them.

If you drop the meter or think it’s not giving accurate readings, make sure that your test drum and control

solution have not expired, then run a control test.

To make sure the display is working properly, turn off the meter,

then press and hold down to see the complete display. All the

sections should be clear and should look exactly like the display as

shown. If not, call the ACCU-CHEK Customer Care Service Center

at 1-800-858-8072.

*Bleach solution must be prepared fresh the day you use it.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 91 92

Pas de commentaire

Accu-Chek Softclix Informations techniques Page 68